M2 Intense 5L - Polymers with Long Lasting Wear

M2 Care Intense is a blend of four polymers that exhibit outstanding long lasting wear combined with superb scuff and friction resistance. The thermoplastic materials used in the manufacture of M2 care Intense  will ensure the floor finish will not powder even under severe conditions.

Intense will withstand high speed burnishing without fracture,  most conventional products will disintegrate under these conditions.

The scuff and mark resistance of M2 Care Intense is superb  and well maintained with M2 Care Daily. Stripping presents no problems.

M2 Care Eliminate will enable the user to remove old finishes from the  floor surface with ease, recommended for use on terrazzo, quarry tiles,  unglazed ceramic tiles, marble, brick, linoleum, vinyl, composition wood and cork floors.

DIRECTIONS
Make sure the floor is thoroughly clean. Apply 3 coats to the floor surface
evenly with a flat mop or applicator and allow to harden for 24 hours before
maintenance scrubbing.

SAFETY DIRECTIONS
Avoid contact with skin and eyes.
In case of contact with eyes rinse immediately with plenty of water.
In case of accident or if you feel unwell, seek medical advice immediately.
Show the label where possible.
After contact with skin, wash immediately with plenty of water.